Image by Alexas_Fotos from Pixabay
latest-news
Comparison of CPCB Revised SOP with Earlier SOP
There is lack of clarity to many processors regarding CPCB SOP guideline as well as debate is going on regarding various topics of SOP, so we humbly tried to make it simple as well as we have provided with difference between New SOP and Old SOP.
For Manufacturers
| Sr. No. | Particulars | SOP dated
15-02-2018 |
SOP dated
26-12-2019 |
Revised SOP
01-08-2020 |
| 1 | Registration Certificate from concerned SPCB/PCC, As per Rule ‘13(2)’of PWM Rules |
Required |
Required |
Required |
| 2
|
Valid consents to operate under Air and Water Acts, as per Rule ‘13(5)’ of PWM Rules |
Required |
Required |
The Consent should be valid on the date of submission of the application
Point No.2.2(5A), Page No.3 |
| 4 | Details of the raw material used in the process as well as their source of procurement to be provided. Necessary documents regarding input material to be provided in case of raw material is imported |
Was not mentioned |
Required |
Required |
| 5 | Quarterly / Six Monthly report of raw material procure and product sale to SPCB/PCC/CPCB |
Was not mentioned |
Quarterly Report Required Point No.6, Page No.12 & 16
|
Six Monthly Report Required Point No.2.6(3), Page No.07 |
| 6 | For issuing Provisional Certificate, interim test report of the sample, as per provision ‘6.3’ of IS/ISO:17088) | After 180 day’s test
report shall be obtained in the name of Manufacturer for ultimate aerobic biodegradation |
After 84 day’s test
report shall be obtained in the name of Manufacturer for ultimate aerobic biodegradation |
Issued in the following two cases:
Interim test report covering first two components (a) Disintegration during composting and Ultimate aerobic biodegradation is submitted.
If the sample has been sent for testing prior to grant of Consent to Operate from SPCB/PCC indicating the sample has not been manufactured at the unit under consideration, the unit shall send a fresh sample manufactured at the unit for testing after the grant of the provisional certificate. Point No.2.5(4A&B), Page No.06&07 |
| 7 | For issuing Final Certificate, as per Indian Standard IS/ISO 17088 | Complete test report of the sample, including seed germination and heavy metal analysis test (after 180 days), shall be obtained in the name of Manufacturer | Complete test report of the sample, including seed germination and heavy metal analysis test (after 180 days), shall be obtained in the name of Manufacturer | Complete test report covering all four components- (a) Disintegration during composting and Ultimate aerobic biodegradation, seed germination and heavy metal analysis test (after 180 days) |
| 8 | Certificate Validity | Provisional Certificate-06Month
Final Certificate-Renewal after 3 years |
Provisional Certificate-06Month
Final Certificate-Renewal after 3 years |
Provisional Certificate-06Month and extended by 06 Month subject to the condition that the reasons cited by the applicant seeking extension are found valid by CPCB.
Point No.2.5(4C), Page No.07
Final Certificate- No Renewal Required Point No.4, Page No.19 |
| 9 | Barcode Generation, Barcode on Bags and its details to SPCB/PCC/CPCB |
Not Mentioned |
Not Mentioned |
Required Point No.2.6(2), Page No.07
|
| 10 | Certificate issuing Time lines | Provisional Certificate-Within 30 days from the date of receipt of application
Final Certificate-Within 30 days from the receipt of the application with complete information Point No-3, Page No.04 |
Provisional Certificate-30 days from the date of receipt of application
Final Certificate-Within 30 days from the receipt of the application with complete information. Point No-3, Page No.04 |
Certificate-Within O7 Working day
Point No.2.5(1), Page No.06
The certificate shall be generated, if CPCB does not send any response to the applicant within one month of the receipt of the application in its office. Point No.2.4(4), Page No.06
|
| 11 | Mode of submission of application and documents to CPCB |
Hard Copies |
Hard Copies |
Email Application along with Digital Signature on all documents
Point No.2.1(2), Page No.01 |
For Sellers
| Sr. No. |
Particulars |
SOP dated
15-02-2018 |
SOP dated
26-12-2019 |
Revised SOP
01-08-2020 |
| 1 | Registration certificate from concerned Local Body or any other Statutory Body. |
Required |
Not Mentioned |
Not Mentioned |
| 2 | The import license from Directorate General of Foreign Trade, in case of import from abroad. |
Required |
Required |
Not Mentioned |
| 4 | For issuing Provisional Certificate, interim test report of the sample (after 180 day’s test report for ultimate aerobic biodegradation, as per provision ‘6.3’ of IS/ISO:17088) |
Required and Obtained in the name of Seller |
Not Mentioned |
Not Mentioned |
| 5 | For issuing Final Certificate, complete test report of the sample, including seed germination and heavy metal analysis test (after 180 days),as per Indian Standard IS/ISO 17088 (as amended time to time) |
Required and Obtained in the name of Seller |
Not Mentioned |
Not Mentioned |
| 6 | Seller will procure its raw material from manufacturer registered with SPCB/PCC and CPCB |
Not Mentioned |
Required |
Required |
| 7 | Authorization letter issued to the seller from the concerned manufacturer |
Not Mentioned |
Not Mentioned |
Required |
| 8 | Quarterly or Six Monthly report of procurement carry bags/product from registered producer and sale of carry bags/product to CPCB |
Not Mentioned |
Quarterly Report Required Point No.4&5, Page No.14 & 18
|
Six Monthly Report Required Point No.2.6(3), Page No.07 |
| 9 | Certificate Validity |
Provisional Certificate-06Month
Final Certificate-Renewal after 3 years |
Provisional Certificate-06Month
Final Certificate-Renewal after 3 years |
Provisional Certificate-06Month and extended by 06 Month subject to the condition that the reasons cited by the applicant seeking extension are found valid by CPCB. Point No.2.5(4C), Page No.07
Final Certificate- No Renewal Required Point No.4, Page No.19
|
| 10 | Certificate issuing Time lines |
Provisional Certificate-Within 30 days from the date of receipt of application
Final Certificate-Within 30 days from the receipt of the application with complete information
Point No-3, Page No.04
|
Provisional Certificate-30 days from the date of receipt of application
Final Certificate-Within 30 days from the receipt of the application with complete information.
Point No-3, Page No.04 |
Certificate-Within O7 Working day Point No.2.5(1), Page No.06
The certificate shall be generated, if CPCB does not send any response to the applicant within one month of the receipt of the application in its office.
Point No.2.4(4), Page No.06
|
| 11 | Mode of submission of application and documents to CPCB |
Hard Copies |
Hard Copies |
Email Application along with Digital Signature on all documents Point No.2.1(2), Page No.01
|
Disclaimer: Above information is just for reference. Advance Bio Material Company does not take any responsibility for any consequences. Please refer/ check CPCB website for more information.
Bioplastics Innovations That Might Save The Environment
Bio-Plastic Can Now Be Made From Sugar and CO2
Scientists from the Centre of Sustainable Chemical Technologies (CSCT) at the University of Bath managed to make a biodegradable form of plastic. It is also made sugar and carbon dioxide and not oil.
It is made by combining a sugar called thymidine with CO2 at low pressures and at room temperature.
Bioplastic Food Wrappers Can Be Edible
Earlier this year researchers at the University of Otago have managed to develop food packaging made from corn and shellfish industry by-products. This is already great news but it gets better – you will be able to eat it too.
Their research will reduce our dependence on oil and other non-biodegradable plastics but also reduce waste by simply eating it rather than binning it.
Image by Hans Braxmeier from Pixabay
Image by Alexas_Fotos from Pixabay
The Toys of the Future Could Be Made from Bioplastics
Two companies, Bio-on and Italeri are currently collaborating on Minerv Supertoys to make their toys of the future from bioplastics. Bio-on’s bioplastic is 100% biodegradable polymer and is completely natural.
Their work has had some encouraging results and they plan to take their PHA-based (polyhydroxyalkanoates) toys to market very soon.
ADVANCE BIO MATERIAL CO. PVT. LTD. in PLASTIVISION INDIA 2020
PLASTIVISION INDIA 2020 was organized by All India Plastic Manufacturer’s Association (AIPMA), between January 16-20, 2020 at Bombay Exhibition Centre – Goregaon, Mumbai. It has been ranked among the top 10 plastic industry events globally.
Advance Bio Material Co. Pvt. Ltd. has exhibited in PLASTIVISION INDIA 2020 and have showed transparent bag made from new raw material having a weight carrying capacity of 25 Kg. This bag was kept hanging at the stall continuously for 7 days. More than 500 plus visitors have visited our stalls and some of the visitors have shown interest in taking up the trial immediately after the exhibition in their own facility
ADVANCE BIO MATERIAL CO. PVT. LTD. in BioPlastEx-2019
BioPlastEx-2019 was India’s 1st International Exhibition & Conference on Bioplastics was organized between 8th & 9th November 2019, at Manpho Convention Centre, Bangalore.
Advance Bio Material Co. Pvt. Ltd. has exhibited in BioPlastEx-2019 and have shown a range of grades in Bioplastics raw material that can be used in manufacturing of carry bags, shopping bags, roll on bags, garbage bags, Mulch films; Injection molded cutlery products, thermoformed products and compostable colour master batch. Our stall was visited by more than 150 customers from plastics industry. Many visitors have shown interest in taking up the trial immediately after the exhibition in their own facility.
ADVANCE BIO MATERIAL CO. PVT. LTD. in IPLEX 2019
IPLEX-2019 is South India’s largest plastic expositions; the 10th edition of IPLEX 2019 was conducted between 23 – 25 August 2019 at Bangalore International Exhibition Centre, Bangalore.
Advance Bio Material Co. Pvt. Ltd. has exhibited in IPLEX 2019 and has shown a live demonstration of processing of our Compostable and Biodegradable raw material grade-ADFLEX-FT-1/ADFLEX-FT-3 at two different Stalls. More than 400 plus visitors have visited our stalls. During the exhibition we have also processed our new grade ADFLEX-FT-1-ECO targeting the price conscious customers. All visitors at our stall have got the first hand experience to see the processing of compostable and biodegradable raw materials. Many visitors have shown interest in taking up the trial immediately after the exhibition in their own facility.
ADVANCE BIO MATERIAL Co. Pvt. LTD in INDIAPLAST- 2019
Advance Bio Material Co. Pvt. Ltd. has participated in recently concluded exhibition INDIAPLAST-2019. It was one of the biggest international plastic exhibition for plastic industries held at India Expo Centre, Greater Noida, Delhi NCR, from 28 Feb – 4 March, 2019.
Advance Bio Material has showcased the live demonstration of processing compostable & biodegradable raw material grade of ADFLEX-FT-1 & ADFLEX-FT-3. Our stall has been visited by more than 700 customers from industries like Plastic processors and converters, Plastic granules manufacturer and reprocessors, FMCG end users, Extrusion blown film machine manufacturers, Entrepreneurs, and Students. All visitors were eager to know about our raw materials, different grade and their applications. Many have shown interest in taking up the trial immediately after the exhibition in their own facility.
ET Polymers – Bioplastics : A Promising Material
You may see our ET Polymer Article titled “Bioplastic: a Promising Material” in Issue Oct-Nov 2018.
https://e.issuu.com/anonymous-embed.html?u=etpolymers&d=oct-nov_2018&p=48
ET Polymers:Advertisement
You may see our advertisement in ET Polymer Magazine Issue Oct-Nov 2018.
Advance Bio Material P. Ltd. in IPLEX-2018
IPLEX-2018 is one of the South India’s biggest exhibition on plastics, organized by TAAPMA—Telangana, Andhra Pradesh, Plastics Manufacturers Association between August 3 – 6, 2018 at Hitex Exhibition Centre, Hyderabad. The exhibition has drawn quality 50,000 plus B2B visitors. The 9th edition of IPLEX-18, was supported by the industries across India & Globe with 350 exhibitors showcased their products, machinery, and equipments.
Advance Bio Material P. Ltd. has shown a live demo of processing biodegradable and compostable raw material grade-ADFLEX-FT-1TM at two different Stalls. We have received huge response from the visitors on both the stalls. Visitors were eager to know about our raw materials, its different grade and applications. Along with the information, visitors and have got the first hand experience to see the processing of this kind of raw material. Many have shown interest in taking up the trial immediately after the exhibition in their own facility.
